Pond and bed edging 7mmx15cmx10 m

Characteristics of the pond and bed edge:

A pond and bed edging in any design will delineate the garden in a sophisticated way. The pond, pond and park lawns in any design can be used to create a pond, pond and park lawn in any design from the grassed areas of the garden or park from the beds, crushed stone, bead paving, mulch and other surfaces.

Material:

High quality, UV stable, sunlight and frost resistant. The corded edger does not chop.

Where to use?

Due to its size, it is best suited for the construction of industrial sites, public parks and garden ponds, but it is also recommended for use in retail gardens.

Dumping:

After marking out the trail, a shovel is used to tilt the trail to a depth of approx. After marking out the path, make a 20-25 cm deep trench with a plough, and then place the previously laid out and laid to the desired length in this trench.The plastic plate, which has been spread out and laid out to the desired length, can be slid into the gap, the soil pulled to either side and compacted to fix the edging to the desired line. The right angle can be formed by using a small corner punch. If necessary, it can be cut to size with a handsaw. It is advisable to leave just enough clearance above the ground surface to allow the mower to pass comfortably over it, so that a grass edger is not necessary.

It is practical to use:

-to edge a gravel drainage strip next to buildings,
-to edge footpaths lined with crushed stone or gravelre,
-pázsit és mulcs, vagy kulé kavics- réteg, vagy talajtakaró szegélyezésére,
-kerti tó köré
-virágágyások ill. or plant communities, for separating ungrassed areas and lawns with a straight or wide curve.