T-idom 16x16x16
TYPE
LPE equal T idom 16x16x16 TOK-TOK-TOK
TECHNICAL SPECIFICATIONS
- For LPE pipes
- tube size: 16 mm
- pressure rating: 4 bar
- the easiest to install: a joint is made in seconds
- for cold water only
- can be dismantled and reused afterwards
Installation of LPE fittings
LPE taper fittings can be used to make various pipe connections...
Long description
€1.02 * (nettó: €0.80) | |
Shipping
face
Personal receipt of goods:
1-4 nap
info
A rendelés leadása és a termékek raktárunkba történő beérkezése után (1-4 nap) összekészítjük a csomagot, majd sms - ben vagy e - mailen értesítjük, hogy a termékek átvehetőek (Gazdabolt_2 üzletünkben, hétfőtől - péntekig 8:00 - 17:00 óra között).
By courier:
1-5 nap
info
A rendelés leadása után a futárszolgálat 1-7 munkanap alatt szállítja ki a csomagot, melyről e-mailben értesítjük.
TYPE
LPE equal T idom 16x16x16 TOK-TOK-TOK
TECHNICAL SPECIFICATIONS
- For LPE pipes
- tube size: 16 mm
- pressure rating: 4 bar
- the easiest to install: a joint is made in seconds
- for cold water only
- can be dismantled and reused afterwards
Installation of LPE fittings
LPE taper fittings can be used to make various pipe connections, nozzle connections. Advantages: low cost, simple and lightning fast installation.
For easy and professional installation of LPE taper fittings, the pipe must be cut perpendicular and free of lines. A pair of pipe-cutting shears is best suited for this, but a snicker will also do. After unscrewing the clamping nut, pull it back on the pipe, push the pipe end against the tapered fitting until it hits, then tighten the clamping ring on the fitting and clamp it firmly.
The casing parts do not require additional sealing, but the threaded connections should be sealed with Teflon tape or Loctite.
LPE glands can be disassembled and reused.
LPE equal T idom 16x16x16 TOK-TOK-TOK
TECHNICAL SPECIFICATIONS
- For LPE pipes
- tube size: 16 mm
- pressure rating: 4 bar
- the easiest to install: a joint is made in seconds
- for cold water only
- can be dismantled and reused afterwards
Installation of LPE fittings
LPE taper fittings can be used to make various pipe connections, nozzle connections. Advantages: low cost, simple and lightning fast installation.
For easy and professional installation of LPE taper fittings, the pipe must be cut perpendicular and free of lines. A pair of pipe-cutting shears is best suited for this, but a snicker will also do. After unscrewing the clamping nut, pull it back on the pipe, push the pipe end against the tapered fitting until it hits, then tighten the clamping ring on the fitting and clamp it firmly.
The casing parts do not require additional sealing, but the threaded connections should be sealed with Teflon tape or Loctite.
LPE glands can be disassembled and reused.
Weight: | 0.027 kg |
---|---|
Aviability: | 1-4 nap |
Basic sales unit: | db |
Login
Login or registration with a social account
Login
Login or registration with a social account